Metal rust proof wax MT-206

Product Description:

After curing on the metal surface, this product will form a transparent, wax like dense protective film. This protective film not only has good resistance to environmental corrosion, but also has excellent elasticity, friction resistance, and excellentSmooth and refreshing. Compared with similar products, it has better adhesion and salt spray resistance to metal products.

1、 Application Fields

1. Used for metal coated profiles, steel strips, and steel plate surfaces to prevent rust, wear, increase smoothness, and improve glossiness.

2、 Technical data

1. Appearance: white lotion

2. Emulsification system: anionic/nonionic

3、solid content（%）：30±1

4、PH value：7.0-9.0

5、Melting point of solid wax℃：138

6. Chemical composition: high-density polyethylene wax/acrylic resin

3、 Usage suggestions

1. When using, prepare an aqueous solution of certain viscosity according to the water: wax lotion ratio of 2-3:1, mix it evenly, and use the immersion method for construction. In order to prevent lotion from being polluted, please ensure that the container tank is clean before preparation.

2. Drying and solidification, refer to the baking process conditions: drying at 150 ℃ -250 ℃ for 10-40 seconds. The specific baking process should be adjusted according to the dilution ratio, and if the dilution ratio is increased, the baking time can be shortened as appropriateBetween.

4、 Packaging specifications

25kg/plastic drum, 50kg/plastic drum, 120kg/plastic drum.

This product is a non flammable and non explosive hazardous material and should be stored in a ventilated and dry environment at 5-30 ℃, avoiding exposure to sunlight and freezing. After use, the container should be sealed and have a shelf life of 6 months.

Back to Contents